Removal And Installation

OIL PUMP

Removal and Installation


REMOVAL

1.Remove oil pan (lower). Exploded View.
2.Remove oil pan (upper) and oil strainer. Exploded View (2WD models) or Exploded View (AWD models).
3.Remove front timing chain case and timing chain (primary). Exploded View.
4.Remove oil pump assembly.

INSTALLATION


CAUTION:
Before installation, apply new engine oil to the parts as instructed in the figure.
Note the following, and install in the reverse order of removal.
- When installing, align crankshaft flat faces with oil pump inner rotor flat faces.