Removal And Installation

COOLING FAN

Removal and Installation


REMOVAL

1.Remove reservoir tank and drain hose. Exploded View
2.Remove air cleaner case (LH) and air duct (inlet). Exploded View.
3.Disconnect harness connector from cooling fan control module, and move harness to aside.
4.Remove harness clips.
5.Remove A/T oil cooler tube from fan shroud.
6.Remove cooling fan assembly from under the vehicle.

CAUTION:
Be careful not to damage or scratch on radiator core.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
Only use genuine parts for cooling fan mounting bolt and observe the specified torque (to prevent core support from being damaged).