Lifting Sensor Control Unit

LIFTING SENSOR CONTROL UNIT

Removal and Installation


REMOVAL


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1.Remove driver seat control unit. Driver Seat Control Unit.
2.Slide lifting sensor control unit and remove it from bracket.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
Be sure to clump the harness to the right place.
NOTE:
- After installing the driver seat, perform additional service when replacing control unit. Description.
- After installing the driver seat, perform additional service when removing battery negative terminal. Refer to
Description.