Trunk / Liftgate Weatherstrip: Service and Repair

TRUNK LID

TRUNK LID WEATHER-STRIP : Removal and Installation


REMOVAL

Pull up and remove engagement with body from weather-strip joint.

CAUTION:
Never pull strongly on weather-strip.

INSTALLATION

1.Working from the upper section, align weather-strip center mark (upper) with vehicle center position mark and install weather-strip onto the vehicle.
2.For the lower section, align weather-strip center mark (lower) with center of trunk lid striker.
3.Pull weather-strip gently to ensure that there is no loose section.
NOTE:
Check that weather-strip fits tightly in each corner.