Trunk Finisher Front

TRUNK ROOM TRIM

TRUNK FINISHER FRONT : Removal and Installation


REMOVAL

1.Fully open trunk lid assembly.
2.Remove trunk room lamp (luggage side). Removal And Installation.
3.Remove trunk floor carpet.
4.Remove trunk lid weather-strip. Service and Repair.
5.Remove trunk front finisher fixing clips.
6.Insert a remover tool between the rear seatback center finisher and trunk front finisher to disengage the metal clips.
7.Pull down trunk front finisher, and disengage dual-lock fasteners.
8.Remove trunk front finisher from the vehicle.

INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
Check that metal clips are securely fitted in panel holes on body when installing, and then metal clips in.