Hazard Function

HAZARD FUNCTION

Component Function Check


1. CHECK FUNCTION

1.Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2.Select "FLASHER" in "ACTIVE TEST" mode.
3.Touch "LH" or "RH" to check that it works normally.
Is the inspection result normal?
YES- Hazard warning lamp circuit is OK.
NO- .


Diagnosis Procedure


1. CHECK HAZARD SWITCH CIRCUIT

Check hazard switch circuit.
Hazard Switch.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END