Front Coil Spring And Shock Absorber

FRONT COIL SPRING AND SHOCK ABSORBER

Inspection and Adjustment


ADJUSTMENT BEFORE REMOVAL

Adjust neutral position of 4WAS front actuator. (With 4WAS) Work Procedure (Pattern 1).

INSPECTION AFTER DISASSEMBLY

Shock absorber
Check the following items, and replace the part if necessary.
- Shock absorber for deformation, cracks or damage.
- Piston rod for damage, uneven wear or distortion.
- Oil leakage.
Shock absorber Mounting Bracket and Rubber Parts Inspection
Check shock absorber mounting bracket for cracks and rubber parts for wear. Replace it if necessary.
Coil Spring
Check coil spring for cracks, wear or damage. Replace it if necessary.

INSPECTION AFTER INSTALLATION

1.Check wheel sensor harness for proper connection. Exploded View.
2.Check wheel alignment. Front Suspension.
3.Adjust neutral position of steering angle sensor. (Without 4WAS) Work Procedure.
4.Adjust neutral position of 4WAS front actuator. (With 4WAS) Work Procedure (Pattern 2).