Removal And Installation

UPPER LINK

Removal and Installation


REMOVAL

1.Perform adjustment before removal. (With 4WAS) Inspection.
2.Remove tires with power tool. Exploded View.
3.Remove shock absorber. Removal and Installation.
4.Remove mounting bolts and stopper rubber, and then remove upper link from vehicle.
5.Perform inspection after removal. Inspection.

INSTALLATION

Note the following, and install in the reverse order of removal.
- Perform final tightening of bolts and nuts at the vehicle installation position (rubber bushing), under unladen conditions with tires on level ground.
- Perform inspection after installation. Inspection.