Replacement

GLOVE BOX LAMP

Replacement


CAUTION:
- Disconnect the battery negative terminal or remove the fuse.
- Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
- Never touch bulb by hand while it is lit or right after being turned off.
- Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one.

GLOVE BOX LAMP BULB

1.Remove instrument lower cover. Removal And Installation.
2.Remove glove box assembly, and then remove instrument lower panel RH. Removal And Installation.
3.Rotate the bulb socket counterclockwise to unlock it.
4.Remove the bulb.