Refilling

GEAR OIL

Refilling






1.Remove filler plug (1) and gasket from transmission case.
2.Fill with new gear oil to transmission as shown in the figure.
Oil grade and : Refer to {LINK_TO_MANY:0000000007470201}{LINK_TO_MANY:0000000007470202}, "FOR NORTH AMERICA


viscosity: Fluids and Lubricants".
Oil capacity: General Specification.

CAUTION:
Never reuse drained gear oil.
3.After refilling gear oil, check the oil level. Inspection.
4.Set a gasket on filler plug and then install it to transmission case.

CAUTION:
Never reuse gasket.
5.Tighten filler plug to the specified torque. Exploded View.