Special Repair Requirement (Pattern 1)

INSPECTION AND ADJUSTMENT

4WAS FRONT ACTUATOR NEUTRAL POSITION ADJUSTMENT : Special Repair Requirement (Pattern 1)


1. 4WAS FRONT ACTUATOR ADJUSTMENT

With CONSULT
1.Start the engine.

CAUTION:
Stop the vehicle.
2.Turn the steering wheel to adjust "ACTR ROTA ANG" of the 4WAS front control unit "DATA MONITOR" so that it falls within the range shown below:
ACTR ROTA ANG: 3.5 - 3.5 deg
3.Turn the ignition switch OFF.

CAUTION:
Never touch the steering wheel after turning ignition switch OFF.
- END