Removal and Installation

UNIFIED METER AND A/C AMP.

Removal and Installation


REMOVAL

1.Remove the display unit. Without Rear View Camera (Base audio without rear view camera), With Rear View Camera (Base audio with rear view camera), {LINK_TO_MANY:0000000007472862}{LINK_TO_MANY:0000000007472863}, "Removal and
Installation" (BOSE audio without navigation), or With Navigation (BOSE audio with navigation).
2.Remove the unified meter and A/C amp and AV control unit as an assembly.
3.Remove the bracket screws and remove the unified meter and A/C amp.

INSTALLATION

Install in the reverse order of removal.
NOTE:
- Unified meter and A/C amp. screws are different from other screws. Never confuse them when installing.
- Since AV control unit connector and unified meter and A/C amp. connector have the same from, be careful not insert them wrongly.