Removal and Installation

TRUNK LID

TRUNK LID WEATHERSTRIP : Removal and Installation


REMOVAL

Pull up and remove engagement with body from weather-strip joint.

CAUTION:
After removal, never pull strongly on the weather-strip.

INSTALLATION

1.Align the weather-strip seam (upper) with mark of the body panel and weather-strip onto the vehicle.
2.Align the weather-strip seem (lower) with center of the striker and weather-strip onto the vehicle.
3.After installation, pull the weather-strip gently to ensure that there is no loose section.
NOTE:
Check that the weather-strip fits tightly at each corner and trunk rear plate.