Component Tests and General Diagnostics

FRONT SUSPENSION ASSEMBLY

Inspection


MOUNTING INSPECTION

Check the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.

BALL JOINT AXIAL END PLAY

1.Set front wheels in a straight-ahead position.
2.Measure axial end play by playing and moving up/down with iron bar or equivalent between transverse link or upper link and steering knuckle.
Axial end play: Ball Joint.

CAUTION:
- Never depress brake pedal when measuring.
- Never perform with tires on level ground.
- Be careful not to damage ball joint boot. Never damage the installation position by applying excessive force.

Shock absorber

Check for oil leakage, damage. Replace it if necessary.