Removal and Installation

FRONT STABILIZER

Removal and Installation


REMOVAL

1.Remove tires with power tool. Exploded View.
2.Remove engine lower cover with power tool. Exploded View.
3.Remove stabilizer connecting rods.

CAUTION:
Apply a matching mark to identify the installation position.
4.Remove stabilizer clamps and stabilizer bushings.
5.Remove stabilizer bar.

INSTALLATION

Note the following, and install in the reverse order of removal.
- Check the matching mark when installing.
- Tighten the mounting nut to the specified torque while holding a hexagonal part of stabilizer connecting rod side.