Connecting Rod, Engine

Connecting rod bolt
Tighten 28.4 Nm (2.9 kg-m, 21 ft-lb)
Completely loosen connecting rod bolts 0 Nm (0 kg-m, 0 ft-lb)
Tighten 24.5 Nm (2.5 kg-m, 18 ft-lb)
Angle tighten connecting rod bolts 90 degrees clockwise

Connecting rod side clearance
Standard 0.20 - 0.35 mm (0.0079 - 0.0138 in)
Limit 0.40 mm (0.0157 in)

Connecting rod bushing inner diameter
Grade No. 0 22.000 - 22.006 mm (0.8661 - 0.8664 in)
Grade No. 1 22.006 - 22.012 mm (0.8664 - 0.8666 in)

Connecting rod big end diameter (Without bearing)
Grade No. A 57.000 - 57.001 mm (2.2441 - 2.2441 in)
Grade No. B 57.001 - 57.002 mm (2.2441 - 2.2442 in)
Grade No. C 57.002 - 57.003 mm (2.2442 - 2.2442 in)
Grade No. D 57.003 - 57.004 mm (2.2442 - 2.2442 in)
Grade No. E 57.004 - 57.005 mm (2.2442 - 2.2443 in)
Grade No. F 57.005 - 57.006 mm (2.2443 - 2.2443 in)
Grade No. G 57.006 - 57.007 mm (2.2443 - 2.2444 in)
Grade No. H 57.007 - 57.008 mm (2.2444 - 2.2444 in)
Grade No. J 57.008 - 57.009 mm (2.2444 - 2.2444 in)
Grade No. K 57.009 - 57.010 mm (2.2444 - 2.2445 in)
Grade No. L 57.010 - 57.011 mm (2.2445 - 2.2445 in)
Grade No. M 57.011 - 57.012 mm (2.2445 - 2.2446 in)
Grade No. N 57.012 - 57.013 mm (2.2446 - 2.2446 in)