Seat Belt Warning Lamp Does Not Turn On

SEAT BELT WARNING LAMP DOES NOT TURN ON

Diagnosis Procedure


1. CHECK SELF-DIAGNOSIS RESULT

Perform "COMBINATION METER" self-diagnostic result. Testing and Inspection
Is DTC detected?
YES- Repair or replace the malfunctioning parts.
NO- GO TO 2.

2. CHECK POWER SUPPLY

Check that fuses are not blown.
Check ignition power supply of combination meter. Power Supply and Ground Circuit
Is the inspection result normal?
YES- GO TO 3.
NO- Repair or replace the malfunctioning parts.

3. CHECK SEAT BELT BUCKLE SWITCH (DRIVER SIDE)

Check seat belt buckle switch (driver side). Component Function Check
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. .CHECK SEAT BELT BUCKLE SWITCH (PASSENGER SIDE)

Check seat belt buckle switch (passenger side). Component Function Check
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. .CHECK SEAT BELT WARNING LAMP CIRCUIT

Check seat belt warning lamp circuit. Seat Belt Warning Lamp Circuit
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CONFIRM THE OPERATION

Confirm the operation again.
Is the inspection result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.