Base Audio

CONFIGURATION (AV CONTROL UNIT)

Work Procedure

NOTE:
If "WRITE CONFIGURATION" is unsuccessful, perform "Accessory Number Initialization". For details, refer to
Base Audio.
After performing "Accessory Number Initialization", reboot the AV control unit to perform "WRITE CONFIGURATION".

1. WRITING MODE SELECTION

CONSULT-III Configuration
Select "CONFIGURATION" of "MULTI AV".
When writing saved data-GO TO 2.
When writing manually-GO TO 3.

2. PERFORM "WRITE CONFIGURATION-CONFIG FILE"

CONSULT-III Configuration
Perform "WRITE CONFIGURATION-Config file".
- WORK END

3. PERFORM "WRITE CONFIGURATION-MANUAL SELECTION"

CONSULT-III Configuration
Select "WRITE CONFIGURATION-Manual selection" to write vehicle specifications into the AV control unit.
For data to write, Base Audio.
- GO TO 4.

4. OPERATION CHECK

Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
- WORK END