Low Tire Pressure Warning Lamp

LOW TIRE PRESSURE WARNING LAMP

Component Function Check


1. CHECK THE ILLUMINATION OF THE LOW TIRE PRESSURE WARNING LAMP

Check that the low tire pressure warning lamp is turned OFF after illuminating for approximately 1 second, when the ignition switch is turned ON.
Is the inspection result normal?
YES- INSPECTION END
NO- Perform trouble diagnosis. .


Diagnosis Procedure


1. POWER SUPPLY AND GROUND CIRCUIT

Check power supply and ground circuit. Power Supply and Ground Circuit.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace damaged parts.

2. PERFORM SELF-DIAGNOSIS

With CONSULT-III
Perform "SELF-DIAG RESULTS" in "AIR PRESSURE MONITOR" of "BCM".
Is any DTC detected?
YES- Check the DTC. Testing and Inspection.
NO- GO TO 3.

3. CHECK LOW TIRE PRESSURE WARNING LAMP SIGNAL

With CONSULT-III
1.Turn the ignition switch ON.

CAUTION:
Never start the engine.
2.Perform "DATA MONITOR" in "AIR PRESSURE MONITOR" of "BCM".
3.Select "BCM" in "DATA MONITOR", and check that the low tire pressure warning lamp is turned OFF after illuminating for approximately 1 second, when the ignition switch is turned ON.
Is the inspection result normal?
YES- Check the combination meter. System Description.
NO- Replace the BCM. Exploded View.