Removal and Installation

TIRE PRESSURE RECEIVER

Removal and Installation


REMOVAL

1.Remove the glove box assembly. Exploded View A/T Models (A/T) or {LINK_TO:0000000006469762}, "M/T
MODELS : Exploded View" (M/T).
2.Remove the instrument lower panel RH. Exploded View A/T Models (A/T) or Exploded View M/T Models (M/T).
3.Disconnect tire pressure receiver harness connector.
4.Remove tire pressure receiver mounting screw.
5.Remove tire pressure receiver.

INSTALLATION

Install is the reverse order of removal.