Steering/Suspension - Alignment Toe Setting Tolerance Increase

Classification: ST 120-002

Reference: ITB12-015

Date: March 29, 2012

ALIGNMENT TOE SETTING TOLERANCE INCREASE

APPLIED VEHICLE(S): All 2011 - 2012 vehicles

SERVICE INFORMATION

Infiniti has changed the Alignment toe specifications for the applied model years. Updated specifications are for Total Toe only, and individual wheel toe measurements have been deleted.

^ If steering wheel is straight and/or vehicle does not drift (refer to TSB ITB08-046e) on a pre-alignment test drive, do not adjust individual wheel toe angles.

^ If steering wheel is not straight and/or vehicle does drift on a pre-alignment test drive (refer to TSB ITB08-046e), repair and/or align vehicle.

Always target nominal or best value to fix customer concern.

NOTE:
^ Refer to the Electronic Service Manual (ESM) for model specific alignment procedures and all other alignment specifications.

^ Charts apply to both 2011 and 2012 unless otherwise specified in the individual tables.











ALIGNMENT TOE SPECIFICATIONS