Removal and Installation

FRONT FOG LAMP

Removal and Installation


CAUTION:
Disconnect the battery negative terminal or remove the fuse.

REMOVAL

Standard bumper
1.Remove the front fender protector. Keep a service area. Exploded View.
2.Remove the front fog lamp connector.
3.Remove the front fog lamp mounting bolts, and then remove the front fog lamp.
Sports bumper
1.Remove the front fender protector. Keep a service area. Exploded View.
2.Remove the front fog lamp finisher.
3.Remove the front fog lamp connector.
4.Remove the front fog lamp mounting bolts, and then remove the front fog lamp.

INSTALLATION

Installation is the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer toDescription.