Hazard Function

HAZARD FUNCTION

Description

Performs answer-back for each operation with number of blinks.


Component Function Check


1. CHECK FUNCTION

1.Use CONSULT-III to perform BCM "Active Test" ("FLASHER").
2.Touch "LH" or "RH" to check that it works normally.
Is the inspection result normal?
YES- Hazard warning lamp circuit is OK.
NO- .


Diagnosis Procedure


1. CHECK HAZARD SWITCH CIRCUIT

Xenon Type Without Daytime Running Light System.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CHECK INTERMITTENT INCIDENT

Intermittent Incident.
- INSPECTION END