Rear Floor Duct 1

DUCT AND GRILLE

REAR FLOOR DUCT 1 : Removal and Installation


REMOVAL

1.Remove center console assembly. Exploded View (A/T models) or Exploded View.
2.Remove Instrument side panel RH. Exploded View A/T Models (A/T models) or Exploded View M/T Models (M/T models).
3.Remove AV control unit. Refer to the following.
-Base Audio (BASE AUDIO WITHOUT NAVIGATION)
-Without Navigation (BOSE AUDIO WITHOUT NAVIGATION)
-With Navigation (BOSE AUDIO WITH NAVIGATION)





4.Remove mounting clip (A).
5.Remove mounting clips (B), and then peel back floor carpet to a point where rear floor duct 1 (1) is visible.
6.Remove rear floor duct 1 to rightward.

INSTALLATION

Installation is basically the reverse order of removal.