Power Walk-In Function Does Not Operate

POWER WALK-IN FUNCTION DOES NOT OPERATE

Diagnosis Procedure


1. CHECK POWER WALK-IN FUNCTION

Check power walk-in function.
System Description.
Is the inspection result normal?
YES- Power walk-in function is OK.
NO- GO TO 2.

2. PERFORM INITIALIZATION PROCEDURE

1.Perform initialization procedure.
Special Repair Requirement.
2.Check power walk-in function.
System Description.
Is the inspection result normal?
YES- Power walk-in function is normal.
NO- GO TO 3.

3. CHECK POWER WALK-IN SWITCH

Check power walk-in switch.
Power Walk-In Switch.
Is the inspection result normal?
YES- GO TO 4.
NO- Repair or replace the malfunctioning parts.

4. CHECK SEAT BELT BUCKLE SWITCH

Check seat belt buckle switch.
Seat Belt Buckle Switch.
Is the inspection result normal?
YES- GO TO 5.
NO- Repair or replace the malfunctioning parts.

5. CHECK FORWARD SWITCH

Check forward switch.
Forward Switch.
Is the inspection result normal?
YES- GO TO 6.
NO- Repair or replace the malfunctioning parts.

6. CHECK SLIDING LIMIT SWITCH

Check sliding limit switch.
Sliding Limit Switch.
Is the inspection result normal?
YES- GO TO 7.
NO- Repair or replace the malfunctioning parts.

7. CHECK DRIVER SIDE DOOR SWITCH

Check driver side door switch.
Door Switch
Is the inspection result normal?
YES- GO TO 8.
NO- Repair or replace the malfunctioning parts.

8. CONFIRM THE OPERATION

Check the operation again.
System Description.
Is the result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.