Security Indicator Lamp Does Not Turn on or Flash

SECURITY INDICATOR LAMP DOES NOT TURN ON OR FLASH

Description

Security indicator lamp does not blink when ignition switch is in a position other than ON
NOTE:
- Before performing the diagnosis, check "Work Flow". Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

Conditions of Vehicle (Operating Conditions)

- Intelligent Key is not inserted in key slot.
- Ignition switch is not in the ON position.


Diagnosis Procedure


1. CHECK SECURITY INDICATOR LAMP

Check security indicator lamp.
Security Indicator Lamp.
Is the inspection result normal?
YES- GO TO 2.
NO- Repair or replace the malfunctioning parts.

2. CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?
YES- Check intermittent incident. Intermittent Incident.
NO- GO TO 1.