Removal And Installation

REAR POWER WINDOW SWITCH


Removal and Installation


REMOVAL
1. Remove the rear door finisher. Rear Door Finisher.





2. Remove the armrest mounting screws (A), and then remove the armrest from the rear door finisher.
3. Remove grip finisher (2) from the armrest.
4. Remove mounting screws (B) of power window switch finisher
(1) from the armrest. Remove power window switch finisher (1) from the armrest.
5. Disengage pawls of power window switch finisher (1) from rear power window switch (3), using a flat-bladed screwdriver.
Remove rear power window switch(3).

CAUTION:
Never bend finisher pawls when removing switch.

INSTALLATION
Install in the reverse order of removal.

NOTE:
If rear power window switch is replaced or is removed, it is necessary to perform the initialization procedure.