Inspection After Removal

REAR WHEEL HUB AND HOUSING


Inspection


INSPECTION AFTER REMOVAL

Wheel Hub and Bearing Assembly
Check the wheel hub and bearing assembly for wear, cracks, and damage. Replace if necessary.

Axle Housing
Check the axle housing for wear, cracks, and damage. Replace if necessary.

Ball Joint Inspection
Check for boot breakage, axial looseness, and torque of suspension arm ball joint. Inspection.

INSPECTION AFTER INSTALLATION
1. Adjust parking brake operation (stroke). Inspection.
2. Check wheel alignment. Rear Suspension Wheel Alignment Inspection.
3. Adjust neutral position of steering angle sensor. Work Procedure.
4. Adjust levelizer adjustment of height sensor. (With AFS) Special Repair Requirement Xenon Type.