Variable Valve Timing Control Module: Service and Repair

VVEL CONTROL MODULE


Removal and Installation


REMOVAL
1. Remove hoodledge cover (RH) and cowl top cover (RH). Exploded View.
2. Remove the battery and battery tray. Exploded View.





3. Remove VVEL control module bracket bolts (A).
4. Remove the ground harness fix bolt (B).
5. Remove VVEL control module bracket (1).
6. Disconnect VVEL control module harness connector.





7. Remove the fix bolts (A). And then separate VVEL control module (1), ground harness (2) and VVEL control module bracket
(3).

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Must be perform additional service when replacing VVEL control module. Work Procedure.