Driving Pattern

HOW TO ERASE PERMANENT DTC


Driving Pattern


DRIVING PATTERN B
Driving pattern B means a trip satisfying the following conditions.
- Engine speed reaches 400 rpm or more.
- Water temperature reaches 70�C (158�F) ore more.
- Vehicle speed of 70 � 120 km/h (44 � 75 MPH) is maintained for 60 seconds or more under the control of closed loop.
- Vehicle speed of 30 � 60 km/h (19 � 37 MPH) is maintained for 10 seconds or more under the control of closed loop.
- Under the closed loop control condition, the following state reaches 12 seconds or more in total: Vehicle speed of 4 km/h (2 MPH) or less with idling condition.
- The state of driving at 10 km/h (7 MPH) or more reaches 10 minutes or more in total.
- A lapse of 22 minutes or more after engine start.

CAUTION:
Always drive at a safe speed.

NOTE:
- Drive the vehicle at a constant velocity.
- When the same malfunction is detected regardless of driving conditions, reset the counter of driving pattern
B.
- When the above conditions are satisfied without detecting the same malfunction, reset the counter of driving pattern B.

DRIVING PATTERN D
Driving pattern D means operating vehicle as per the following.
- The state of driving at 40 km/h (25 MPH) reaches 300 seconds or more in total.
- Idle speed lasts 30 seconds or more.
- A lapse of 600 seconds or more after engine start.

CAUTION:
Always drive at a safe speed.

NOTE:
- When the same malfunction is detected regardless of driving conditions, reset the counter of driving pattern
D.
- When the above conditions are satisfied without detecting the same malfunction, reset the counter of driving pattern D.