Removal And Installation

DOOR PARTING SEAL


Removal and Installation


FRONT DOOR PARTING SEAL

Removal
1. Fully open front door.
2. Remove front door parting seal mounting clips.

CAUTION:
- Disengage the clips slowly and carefully.
- Never pull the front door parting seal strongly.
3. Remove front door parting seal.

Installation
Note the following items, and then install in the reverse order or removal.

CAUTION:
When installing, visually check the front door parting seal and the clips, then replace them with new parts if they are damaged.

REAR DOOR PARTING SEAL

Removal
1. Fully open rear door.
2. Remove rear door parting seal mounting clips.

CAUTION:
- Disengage the clips slowly and carefully.
- Never pull the front door parting seal strongly.
3. Remove rear door parting seal.

Installation
Note the following items, and then install in the reverse order or removal.

CAUTION:
When installing, visually check the rear door parting seal and the clips, then replace them with new parts if they are damaged.

REAR DOOR PARTING SEAL (FRONT)

Removal
1. Fully open front door.
2. Pull back rear door parting seal (front).

CAUTION:
Never bend the rear door parting seal (front) strongly.
3. Remove rear door parting seal (front).

Installation
Note the following items, and then install in the reverse order or removal.

CAUTION:
- When installing, visually check the door parting seal (front) and the clips, then replace them with new parts if they are damaged.
- Replace double-faced adhesive tape with a new one, if the rear door parting seal (front) is reused.
- Remove double-faced adhesive tape remaining on body and back of rear door parting seal (front) with a double-faced adhesive tape remover, after removing rear door parting seal (front).
- Never wash the vehicle within 24 hours after installing so as to keep adhesive.