Lifting Sensor Control Unit

LIFTING SENSOR CONTROL UNIT


Removal and Installation


REMOVAL

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove driver seat control unit. Service and Repair.
2. Slide lifting sensor control unit and remove it from bracket.

INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
- After installing the driver seat, perform additional service when replacing control unit. Description Special Repair Requirement Description, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description".
- After installing the driver seat, perform additional service when removing battery negative terminal. Description.