Memory Positioning Module: Service and Repair

AUTOMATIC DRIVE POSITIONER CONTROL UNIT


Removal and Installation


REMOVAL

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.
1. Remove the instrument lower panel LH. Removal And Installation.
2. Remove the screws.
3. Remove automatic drive positioner control unit.

INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to clump the harness to the right place.
NOTE:
- After installing the driver seat, perform additional service when replacing control unit. Description Special Repair Requirement Description, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description".
- After installing the driver seat, perform additional service when removing battery negative terminal. Description.