Rear Door Exterior Handle

REAR DOOR LOCK


OUTSIDE HANDLE : Removal and Installation


REMOVAL





1. Remove door side grommet, and loosen TORX bolt from grommet hole.

CAUTION:
Never remove TORX bolt forcibly.

Arrow : TORX bolt






2. While pulling outside handle, remove outside handle escutcheon.





3. While pulling outside handle (1), slide toward rear of vehicle to remove outside handle.
4. Remove rear door finisher. Rear Door Finisher.
5. Remove sealing screen. Removal And Installation.
6. Fully close rear door glass.
7. Remove front gasket and rear gasket.





8. While pulling outside handle bracket, slide toward rear of vehicle to remove outside handle bracket.
9. Reach in to separate outside handle cable connection on outside handle bracket.

INSTALLATION
Note the following item, and install in the reverse order of removal.

CAUTION:
Check door open/close, lock/unlock operation after installation.