Kicking Plate Outer

BODY SIDE TRIM


KICKING PLATE OUTER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.

REMOVAL

FRONT KICKING PLATE OUTER





1. Insert a remover tool (A) between front kicking plate outer and body panel to disengage pawls.
2. Pull up front kicking plate outer to remove.

Triangle: Pawl


REAR KICKING PLATE OUTER





1. Insert a remover tool between rear kicking plate outer and body panel to disengage pawls.
2. Pull up rear kicking plate outer to remove.

Triangle: Pawl


INSTALLATION
Note the following item, and then install in the reverse order of removal.

CAUTION:
Check that pawls are securely fitted in panel holes on body when installing, and then press pawls in.