Trunk / Liftgate Weatherstrip: Service and Repair

TRUNK LID


TRUNK LID WEATHER-STRIP TRUNK LID WEATHER-STRIP : Removal and Installation


REMOVAL
Pull up and remove engagement with body from weather-strip joint.

CAUTION:
Never pull strongly on weather-strip.

INSTALLATION
1. Working from the upper section, align weather-strip center mark (upper) with vehicle center position mark and install weather-strip onto the vehicle.
2. For the lower section, align weather-strip center mark (lower) with center of trunk lid striker.
3. Pull weather-strip gently to ensure that there is no loose section.

NOTE:
Check that weather-strip fits tightly in each corner.