LDP On Indicator Lamp Does Not Turn On

LDP ON INDICATOR LAMP DOES NOT TURNED ON





Description
The LDP ON indicator lamp in the combination meter does not turn ON when turning on the ignition switch




Diagnosis Procedure
1.CHECK LDP ON INDICATOR LAMP
1. Check that "LDP ON IND" operate normally in "ACTIVE TEST" of "ICC/ADAS".
2. Check if the LDP ON indicator lamp illuminates when operates each test item.
Is the inspection result normal?
YES - GO TO 4.
NO - GO TO 2.
2.CHECK COMBINATION METER
Turn the ignition switch from OFF to ON to check that "LDP IND" included in "DATA MONITOR" in "METER/M&A" operates normally.
Is the inspection result normal?
YES - Replace the combination meter. Removal And Installation.
NO - GO TO 3.
3.CHECK SELF-DIAGNOSIS RESULTS OF COMBINATION METER
1. Perform "All DTC Reading" with CONSULT-III.
2. Check if the DTC is detected in self-diagnosis results of "METER/M&A". Testing and Inspection.
Is any DTC detected?
YES - Repair or replace malfunctioning parts.
NO - GO TO 4.
4.CHECK SELF-DIAGNOSIS RESULTS OF ADAS CONTROL UNIT
Check if the DTC is detected in self-diagnosis results of "ICC/ADAS" Testing and Inspection.
Is any DTC detected?
YES - Repair or replace malfunctioning parts.
NO - Replace the ADAS control unit. Service and Repair.