Front Suspension

FRONT SUSPENSION ASSEMBLY


Inspection


MOUNTING INSPECTION
Make sure the mounting conditions (looseness, backlash) of each component and component conditions
(wear, damage) are normal.

BALL JOINT AXIAL END PLAY
1. Set front wheels in a straight-ahead position.

CAUTION:
Never depress brake pedal.
2. Place an iron bar or equivalent between transverse link or upper link and steering knuckle.
3. Measure axial end play by prying it up and down.

Standard
Axial end play : Refer to "Ball Joint". Ball Joint

CAUTION:
Be careful not to damage ball joint boot. never damage the installation position by applying excessive force.

SHOCK ABSORBER
Check for oil leakage, damage and replace if malfunction is detected.