Special Repair Requirement (Pattern 1)

INSPECTION AND ADJUSTMENT


4WAS FRONT ACTUATOR NEUTRAL POSITION ADJUSTMENT : Special Repair Requirement (Pattern 1)

1. 4WAS FRONT ACTUATOR ADJUSTMENT
With CONSULT-III
1. Start the engine.

CAUTION:
Stop the vehicle.
2. Turn the steering wheel to adjust "ACTR ROTA ANG" of the 4WAS front control unit "DATA MONITOR" so that it falls within the range shown below:

ACTR ROTA ANG : -3.5 - 3.5°


3. Turn the ignition switch OFF.

CAUTION:
Never touch the steering wheel after turning ignition switch OFF.
- END