Description

INSPECTION AND ADJUSTMENT


4WAS FRONT ACTUATOR NEUTRAL POSITION ADJUSTMENT 4WAS FRONT ACTUATOR NEUTRAL POSITION ADJUSTMENT : Description

- Perform 4WAS front actuator adjustment when performing any service below.
- 4WAS front actuator and the steering components (including wheel alignment) removal. Special Repair Requirement (Pattern 1).

CAUTION:
- Check the following items before the removal:
- 4WAS warning lamp OFF after the engine starts.
- Self-diagnosis of each control unit of 4WAS system (4WAS front control unit/4WAS main control unit) is performed. Check that 4WAS system controlled properly.
- 4WAS front actuator and the steering components (including wheel alignment) installation. Special Repair Requirement (Pattern 2).
- 4WAS front control unit and the steering angle sensor replacement. Special Repair Requirement (Pattern 3).
- When driving while misaligning the steering wheel position (center) after installing 4WAS front actuator. Special Repair Requirement (Pattern 4).