Ign Off Interlock Door Unlock Function Does Not Operate

IGN OFF INTERLOCK DOOR UNLOCK FUNCTION DOES NOT OPERATE





Description

NOTE:
Before performing the diagnosis in the following procedure, check the operation condition. System Description.




Diagnosis Procedure
1.CHECK POWER DOOR LOCK OPERATION
Check power door lock operation.
Does door lock/unlock with door lock and unlock switch?
YES - GO TO 2.
NO - All Door.
2.CHECK "AUTOMATIC LOCK/UNLOCK SELECT" SETTING IN "WORK SUPPORT"
Check "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT". Consult-III Function.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT".
3.CHECK "AUTOMATIC DOOR UNLOCK SELECT" SETTING IN "WORK SUPPORT"
Check "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT". Consult-III Function.
Is the inspection result normal?
YES - GO TO 4.
NO - Set "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT".
4.CHECK BCM
Check BCM for DTC. Testing and Inspection.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.