Auto Door Lock Operation Does Not Operate

AUTO DOOR LOCK OPERATION DOES NOT OPERATE





Description

NOTE:
Before performing the diagnosis in the following procedure, check the operation condition. System Description.




Diagnosis Procedure
1.CHECK "AUTO LOCK SET" SETTING IN "WORK SUPPORT"
Check "AUTO LOCK SET" setting in "WORK SUPPORT". Intelligent Key.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "AUTO LOCK SET" setting in "WORK SUPPORT".
2.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.