Refilling
GEAR OIL
Refilling
1. Remove filler plug (1) and gasket from transmission case.
2. Fill with new gear oil to transmission as shown in the figure.
Oil grade and viscosity : Refer to MA-10, "Fluids and Lubricants".
Oil capacity : General Specifications "General Specifications".
CAUTION:
Never reuse drained gear oil.
3. After refilling gear oil, check the oil level. Inspection Draining SEE Refilling,
"Inspection".
4. Set a gasket on filler plug and then install it to transmission case.
CAUTION:
Never reuse gasket.
5. Tighten filler plug to the specified torque. Exploded View.