Rear Suspension Assembly

REAR SUSPENSION ASSEMBLY


Inspection


MOUNTING INSPECTION
Check the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.

BALL JOINT AXIAL END PLAY
Measure axial end play by placing and moving up/down with an iron bar or equivalent between suspension arm and lower arm and axle housing assembly.

Axial end play : Specifications "Ball Joint".


CAUTION:
- Never depress brake pedal when measuring.
- Never perform with tires on level ground.
- Be careful not to damage ball joint boot. Never damage the installation position by applying excessive force.

SHOCK ABSORBER
Check for oil leakage and damage. Replace it if necessary.