Removal And Installation

FRONT STABILIZER


Removal and Installation


REMOVAL
1. Remove tires with power tool. Exploded View.
2. Remove engine lower cover with power tool. Exploded View.
3. Remove stabilizer connecting rods.

CAUTION:
Apply a matching mark to identify the installation position.
4. Remove stabilizer clamps and stabilizer bushings.
5. Remove stabilizer bar.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Check the matching mark when installing.
- Tighten the mounting nut to the specified torque while holding a hexagonal part of stabilizer connecting rod side.