Removal And Installation

YAW RATE/SIDE G SENSOR


Removal and Installation


REMOVAL

CAUTION:
- Never drop or strike yaw rate/side G sensor, or never use power tool etc., because yaw rate/side G sensor is sensitive to the impact.
1. Remove center console. (A/T), (M/T).
2. Disconnect yaw rate/side G sensor harness connector.
3. Remove mounting bolts. Remove yaw rate/side G sensor.

INSTALLATION
Note the following, and install in the reverse order of removal.
- Never drop or strike yaw rate/side G sensor, or never use power tool etc., because yaw rate/side G sensor is sensitive to the impact.