Removal And Installation

POWER SOCKET


CONSOLE POWER SOCKET : Removal and Installation


REMOVAL
1. Remove center console assembly. (A/T models) or Exploded View M/T Models, "M/T MODELS : Exploded View" (M/T models).





2. Disconnect power socket connector (A).

C : Cut out

3. Pull out inner socket (2) by pushing the ring pawl (B) from the inner socket hole (square) (D).
4. Remove ring (1) from console box while pressing pawls.

INSTALLATION
Install in the reverse order of removal.

NOTE:
Align the cut outs of inner socket and ring.