Removal And Installation

CIGARETTE LIGHTER


Removal and Installation


REMOVAL
1. Remove console finisher assembly. .





2. Remove the screws (A) from reverse side cigarette lighter socket (1).





3. Pull out cigarette lighter (1).

A : Hole for cigarette lighter (Console finisher assembly)
D : Cut out

4. Pull out cigarette lighter socket (2) by pushing the cigarette lighter ring pawl (B) from the cigarette lighter socket hole
(square) (C).
5. Remove cigarette lighter ring (3) from console finisher assembly while pressing pawls.

INSTALLATION
Install in the reverse order of removal.

NOTE:
Align the cut outs of cigarette lighter socket, cigarette lighter ring and console finisher assembly.