Take Away Warning Does Not Operate

TAKE AWAY WARNING DOES NOT OPERATE





Diagnosis Procedure
1.CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES - GO TO 2.
NO - Check BCM for DTC. Testing and Inspection.
2.CHECK DOOR SWITCH
Check door switch. Door Switch.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK KEY SLOT
Check key slot. Key Slot.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK INSIDE KEY ANTENNA
Check inside key antenna.
- Instrument center: B2621.
- Console: B2622.
- Trunk room: B2623.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter). Buzzer (Combination Meter).
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CHECK COMBINATION METER DISPLAY FUNCTION
Check combination meter display function. Combination Meter Display Function.
Is the inspection result normal?
YES - GO TO 7.
NO - Repair or replace the malfunctioning parts.
7.CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer. Intelligent Key Warning Buzzer.
Is the inspection result normal?
YES - GO TO 8.
NO - Repair or replace the malfunctioning parts.
8.CHECK KEY SLOT INDICATOR
Check key slot indicator. Key Slot Indicator.
Is the inspection result normal?
YES - GO TO 9.
NO - Repair or replace the malfunctioning parts.
9.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.