Removal And Installation

TRUNK LID


TRUNK LID WEATHERSTRIP : Removal and Installation


REMOVAL
1. Roof is fully open.
2. Fully open trunk rid.
3. Remove mounting bolts from trunk lid weather-strip.
4. Remove mounting clips from trunk lid weather-strip.
5. Pull up and remove engagement with body from trunk lid weather-strip joint.

CAUTION:
After removal, never pull strongly on the weather-strip.

INSTALLATION
1. Align the weather-strip seem (lower) with center of the striker and weather-strip onto the vehicle.
2. After installation, pull the weather-strip gently to ensure that there is no loose section.

NOTE:
Check that the weather-strip fits tightly at each corner and trunk rear plate.